AT&T MERLIN LEGEND Release 3.1, Руководство по системному программированию

Страница: 317 / 887

System Features
Common Administrative Procedures
3–181
Console Display/Instructions Additional Information PC
3 Select Recall Timer.
Options:
Make a selection
Unassigned
Cover Delay
BehndSwitch Inter-Digit
_
RecallTimer Ringing Freq
Rotary SecNT Timer
Exit
3
4 Specify a timer setting.
Recall Timer:
Select one
_
350 ms
_
450 ms
_
650 ms
_
1 sec
Press the button or function key next to
Û
Exit Enter
your selection.
5 Save your entry.
Select
Enter Enter
.
0
6 Return to the System Programming menu.
Select
Exit Exit
.
5
Inter-digit Timers
This procedure to program inter-digit timers has not yet been implemented. If
situations occur where a caller is attempting to make an outside call and
becomes connected to an incoming call, the caller may not be able to put the
incoming call on hold or transfer the call. Setting inter-digit timers to shorter
times will permit the call to be put on hold or transfered. If you are experiencing
these types of problems, call the AT&T Helpline at 1 800 628-2888.
Allowed Lists
Use this procedure to establish Allowed Lists. These lists are telephone numbers
that can be dialed from specified telephones, regardless of any calling
restrictions that are assigned to the telephones.
A maximum of eight lists (numbered 0 through 7) with a maximum of 10 numbers
each (numbered 0 through 9) are allowed. Each allowed number can be no
more than six digits (an area code plus an exchange) or six digits with a leading
1, where required.