AT&T MERLIN LEGEND Release 3.1, Руководство по системному программированию

Страница: 844 / 887

Programming Special
Characters
H
System Programming
H–1
This appendix provides the special characters used in dialing sequences for
numbers dialed automatically. The characters allowed depend on the type of
telephone. Ask your system manager which special characters are needed and
when to use them.
Single-Line Telephones
Some dialing sequences need special characters. For example, you would
press and release either the
Recall or Flash button or the switchhook to insert a
pause in a dialing sequence after a dial-out code to allow the system to seize an
outside line before dialing the number.
Table H–1. Special Characters for Single-Line Telephones
Press... Means...
Recall , Flash
or switchhook
Pause. Inserts 1.5 second pause in the dialing
sequence. Multiple consecutive pauses are
allowed.
#
End of Dialing. Used to signal the end of the
dialing sequence or to separate group digits.
e.g., account code from number dialed.