AT&T MERLIN LEGEND Release 3.1, Руководство по системному программированию

Страница: 389 / 887

System Renumbering
Programming Procedures
4–17
Console Display/Instructions Additional Information PC
6 Return to the System Programming menu.
Select
Exit Exit
two times.
55
Single Renumbering
Use this procedure to assign a specified extension number to a telephone,
accessory, line, pool (Hybrid/PBX only), calling group, paging group, or Listed
Directory Number. Single renumbering is also used for Remote Access, Park,
Idle Line Access (Key and Behind Switch only), and Automatic Route Selection
(Hybrid/PBX only).
See Chapter 3, “Common Administrative Procedures” for detailed information.
!
CAUTION:
Select
Exit
on the console or
5
on the PC after renumbering extensions.
If you press Home , extensions may remain in the forced idle condition
(indicated when the LED next to each DSS button is on). To restore
extensions to their normal operating state, restart the system.
When required, this procedure should be performed immediately following the
selection of a system numbering plan.
Summary: Single Renumbering
Programmable by System manager
Mode All
Idle Condition System idle
Planning Form Form 2a, System Numbering: Extension Jacks
Form 2b, System Numbering: Digital Adjuncts
Form 2d, System Numbering: Special Renumbers
Factory Setting Not applicable
Valid Entries Old and new extension numbers
Inspect Yes
Copy Option No
Console Procedure
SysRenumber
®
Single
®
Select item
®
Dial old ext. no.
®
Enter
®
Dial new ext. no.
®
Enter
®
Exit
®
Exit
PC Procedure
2
®
2
®
Select item
®
Type old ext. no.
®
0
®
Type
new ext. no.
®
0
®
5
®
5