Argantix XDS 100-100, Руководство пользователя и программирования

Страница: 101 / 116

User and Programming Manual
XDS Series 101
11.7.1 *CLS
This command clears the following registers (see chapter 13 for descriptions of all status registers):
•
Standard Event Status
•
Status Byte
•
Error Queue
Command Syntax *CLS
Parameters None
11.7.2 *ESE
This command programs the Standard Event Status Enable register bits. The programming
determines which events of the Standard Event Status Event register (see *ESR?) are allowed to set
the ESB (Event Summary Bit) of the Status Byte register. A "1" in the bit position enables the
corresponding event. All of the enabled events of the Standard Event Status Enable Register are
logically OR-ed to cause the Event Summary Bit (ESB) of the Status Byte Register to be set. See
Section 16 for descriptions of the Standard Event Status registers.
The query reads the Standard Event Status Enable register.
Table 11-3: Bit Configuration of Standard Event Status Enable Register
Bit Position 7 6 5 4 3 2 1 0
Bit Name PON not used CME EXE DDE QYE not
used
not used
Bit Weight 128 32 16 8 4
CME Command error DDE Device-dependent error
EXE Execution error QYE Query error
PON Power-on
Command Syntax *ESE <NRf>
Parameters 0 - 255
Power-On Value 128
Example *ESE 129
Query Syntax *ESE?
Returned Parameters <NR1>(Register value)
Related Commands *ESR? *STB?