Apach Bakery Line J 106 C, Руководство по эксплуатации и обслуживанию

Страница: 100 / 108

EN
Use and Maintenance manual J series ING Rev E;
Page 100 of 108
Fans speed setting (Note: two ventilation speeds: OPTIONAL)
Press + and
– to take the corsor on the icon
Fan Speed , press Enter to change the speed
state (LOW/ HIGH). In the various steps of the automatic programmes the function times
can be set at Low or High speed.
Baking cycle START / STOP
Press the Baking cycle setpoint to change the state (START or STOP) or viceversa.
When in STOP all relay outputs are disabled and the Baking time is set to STOP. When
in START the oven starts to manage the outputs with the times set in the setpoints. Once
the baking time has been activated the display shows the time set in countdown mode. At
the end of the countdown the instrument begins to sound intermittently. Press any key to
reset the buzzer. Press the
Baking cycle setpoint to interrupt the baking time Start.
Setting the programme number
Press + and
– to take the cursor on the icon
PROG , press Enter to set the value and
modify it (max 200 programmes). Press Enter again to confirm the value and store it to
memory.
The
“Programme no.” Setpoint cannot be modified if the instrument is in “START” mode.
End of baking.
At the end of the baking time the Buzzer is activated, press any key to silence the buzzer.
Either stop the baking cycle or add some supplementary baking minutes.