Apach Bakery Line J 106 C, Руководство по эксплуатации и обслуживанию

Страница: 99 / 108

EN
Use and Maintenance manual J series ING Rev E;
Page 99 of 108
Setting the temperature
Press the Temperature setpoint key and when the previously set value starts to flash the
value can be modified (the maximum value that can be set is determined by the
compulsory value set in the hidden parameters) To confirm the value set, press
Temperature or Enter , the setpoint will be stored to memory (if the modification occurs
during the heat regulation mode the value is memorised in Ram Backup, otherwise it is
saved in EEP).
Setting the baking time.
Press the Baking time setpoint and when the previously set value starts to flash the value
can be modified (99 minutes is the maximum value that can be set). Press Baking time
or Enter to confirm the value and store it to memory.
Setting the Steam time.
Press the Steam time setpoint and when the previously set value starts to flash the value
can be modified (99 seconds is the maximum value that can be set). Press Steam time
or Enter to confirm the value and store it to memory.
Activating the manual steam
Press + and
– to take the cursor on the
Steam icon and when Enter is held down steam is
injected manually. In this case the Steam Time setpoint is replaced by the Manual Steam
activation time (in seconds). Release
Enter to deactivate the manual steam and the
setpoint will be loaded with the Automatic Steam Time.
Automatic steam exhaust valve setting (Open / Closed).
Press the Steam exhaust valve setpoint to change the valve state (Open / Closed) In the
various steps of the automatic programmes the valve opening and closing time can be
set.