Anritsu BERTWave MP2100B, Руководство по эксплуатации, Страница: 61 / 382

2.2 Part Names
2-7
2
Before Use
The following table describes the input terminals.
Table 2.2.1-2 Input Terminal List
Name Description Maximum Input Level
O/E Data In
(Ch B In)
When the Option 023 is installed
For signal input to channel B of
the sampling oscilloscope
When the Option 054 is installed
This also serves as clock recovery
input.
1.58 mW (+2 dBm)*
1
Trigger Clk In For trigger clock input to the
sampling oscilloscope
2 Vp-p
Tx Data In Optical transceiver transmission
data input
–
Ch A In For signal input to channel A of
the sampling oscilloscope
±2 V
Ch B In When the Option 021 is installed
For signal input to channel B of
the sampling oscilloscope
±2 V
Data/CRU In ED data input with the Option
011, 012, or 014.
When the Option 055 is installed
This also serves as clock recovery
input.
When the Option 053 is installed
For clock recovery signal input
1 Vp-p
Data In*
2
For data input to ED 1 Vp-p
Data
In*
3
For inverted data input to ED 1 Vp-p
*1: Peak level
*2: Same for ED2 to ED4.
*3: Same for ED1 to ED4.
For details of the optical output level range and maximum optical input
level for the optical transceiver, refer to A.2 “Optical Transceiver
Module”.