Anritsu BERTWave MP2100B, Руководство по эксплуатации, Страница: 338 / 382

Appendix A Specifications
A-18
Table A.1.3-6 Vertical System (Cont’d)
Item Specifications
Optical input
*
5
Data input Option 023: CH B
Connector FC*
6
, SC*
7
Suitable fiber Single mode fiber, multi-mode fiber (62.5
µ
m)*
8
Wavelength range 750 to 1650 nm
Bandwidth*
9
DC to 9.0 GHz
Optical noise*
2
(Unit:
µ
Wrms)
Wavelength
Installed Filter
850 nm 1310, 1550 nm
Typ. Max. Typ. Max.
Option 070 to 073, 075 3.1 5.3 1.8 3.1
Option 076, 077 to 080 2.7 4.6 1.5 2.7
Option 081 to 083 3.9 6.3 2.2 3.7
Option 084 to 085 4.8 7.7 2.8 4.5
Option 086
9.9 ≤ bitrate ≤ 10.5 Gbit/s
10.5<bitrate ≤ 11.3 Gbit/s
2.4
2.5
3.8
4.1
1.3
1.4
2.2
2.4
Sensitivity
*
2,
*
10
When using a filter other than Option 086 –12 dBm
When using a filter of Option 086
9.9 ≤ bitrate ≤ 10.5 Gbit/s
10.5 ≤ bitrate (Gbit/s)
–15 dBm
–14.4 dBm
Maximum input power*
11
: Average power –1 dBm (794
µ
W)
Peak power +2 dBm (1.58 mW)
Absolute maximum power: Peak power +5 dBm (3.16 mW)
Optical power measurement: Range –18 to 0 dBm
Accuracy: ±0.35 dB*
2
–12 dBm or more
±0.6 dB
*
2
less than –12 dBm
Optical return loss –30 dB*
2
*5: Option 023 CH B only
*6: Option 037
*7: Option 040
*8: Single mode fiber acceptable
*9: No internal filter, Frequency that electrical output level goes –3 dB
down, typical value
*10: Mask test available range
*11: Level that is considered to be an overload