Anritsu BERTWave MP2100B, Руководство по эксплуатации, Страница: 60 / 382

Chapter 2 Before Use
2-6
Figure 2.2.1-2 Front Panel 2
*1: These connectors are available with the Option 014.
Only PPG 1 and ED 1 are available with the Option 011.
Only PPG 1, PPG 2, ED 1, and ED 2 are available with the Option
012.
*2: Panel for the Option 021.
Only Ch A In is available with the Option 023.
The following table describes the output terminals.
Table 2.2.1-1 Output Terminal List
Name Description Level Range
CRU Out Outputs the clock generated by
clock recovery.
270 to 540 mVp-p
(2.7 GHz or less)
500 to 1500 mVp-p
(8.5 to 12.5 GHz)
Sync Out Outputs one of the following:
 Divided clock synchronized
with PPG output data
 Pulse synchronized with PPG
output pattern
 Divided clock synchronized
with data received by ED
High: 0 V
Low: –0.4
V
Rx Data Out Outputs signal data received by
optical transceiver
–
Data Out* Outputs PPG data. 100 to 800 mVp-p
(Variable)
Data
Out* Outputs inverted PPG data. 100 to 800 mVp-p
(Variable)
*: Same for PPG1 to PPG4.
PPG
1
Data Out Data Out
PPG
2
Data Out Data Out
PPG
3
Data Out Data Out
PPG
4
Data Out Data Out
ED 1
Data/CRU In Data In
ED 2
Data In Data In
ED 3
Data In Data In
ED 4
Data In Data In
Ch A In
Ch B In
Scope
Error Detector
Input Terminal *
1
Pulse Pattern Generator
Output Terminal *
1
Sampling O
scilloscope
Input Terminal *
2