ADCMT 4601 I-V Meter, Руководство по эксплуатации

Страница: 81 / 236

4601 I-V Meter Operation Manual
4. FUNCTIONAL REFERENCE
4-1
Setting Parameter Page Setting Parameter Page
4. FUNCTIONAL REFERENCE
This chapter describes panel keys, parameter groups (categories), parameter items and parameter functions
in the following sections:
• 4.1 Menu Index: Use this section as an index for the parameters in the menu.
• 4.2 Panel Key Descriptions: Describes panel keys, parameter groups (categories), parameter
items and parameter functions.
4.1 Menu Index
Use the Menu Index as the index for the set items in the menu.
Bias Value................................................ 4-6, 4-7
Brightness ................................................ 4-10
Buzzer ...................................................... 4-10
Calib. Mode ............................................. 4-9
Cnt. @ 1st-2nd ......................................... 4-6
Cnt. @ 2nd-3rd ........................................ 4-6
Cnt. @ 2nd-Last....................................... 4-6
Cnt. @ 3rd-Last ....................................... 4-6
Comp./Sync. Sel ...................................... 4-8
Counter Select.......................................... 4-9
Disp/Key Test .......................................... 4-9
Display On/Off ........................................ 4-10
Error Queue.............................................. 4-10
EXT.SIGNAL .......................................... 4-8
First Value................................................ 4-6
GPIB Address .......................................... 4-9
Header...................................................... 4-9
Hold Time ................................................ 4-7
Integ. Time............................................... 4-7
INTERFACE ........................................... 4-9
Interface Bus ............................................ 4-9
Last Value ................................................ 4-6
Level Value.............................................. 4-7
Limit Input ............................................... 4-5
Load ......................................................... 4-8
Load @ PWR On ..................................... 4-9
MAINTENANCE .................................... 4-9
MEASURE .............................................. 4-7
Measure Delay ......................................... 4-7
Measure Switch........................................ 4-7
Measure Zero ........................................... 4-7
Mem. Save/Clear ..................................... 4-7 Memory Clear .......................................... 4-7
Memory Data Set ..................................... 4-7
Memory Recall ........................................ 4-7
Memory Store .......................................... 4-7
Operate Control........................................ 4-8
Output ADC3 Dt...................................... 4-9
Output Format.......................................... 4-9
Output Im Data ........................................ 4-9
Output Vm Data....................................... 4-9
PARAMETER ......................................... 4-8
Period ....................................................... 4-7
Pt/Ad Select ............................................. 4-7
Relay Counter .......................................... 4-9
Reset Counter........................................... 4-9
Response .................................................. 4-5
Return to Bias .......................................... 4-6
Reverse..................................................... 4-6
RTD ......................................................... 4-7
Sample Count........................................... 4-7
Save.......................................................... 4-8
Second Value ........................................... 4-6
Self Test ................................................... 4-9
Serial Number .......................................... 4-9
Signal Width ............................................ 4-8
SOURCE.................................................. 4-5
Source Delay............................................ 4-7
Step /Trigger ............................................ 4-6
Step Count................................................ 4-6
Suspend Z ................................................ 4-5
SWEEP .................................................... 4-5
Sweep Address......................................... 4-7
Sweep Range............................................ 4-5