ADCMT 4601 I-V Meter, Руководство по эксплуатации

Страница: 176 / 236

4601 I-V Meter Operation Manual
6.6.3 Remote Command List
6-30
Mea-
sure-
ment Measurement
buffer
memory RN? Response: RNn,adr
n : <d>
adr: <dddd>
SZ? Reads out the number of stored data.
(0) *6
Response: <dddd>
RNM adr adr: Specifies the store data number (0 to 4000).
0 *6
When the store data number of the measurement buffer
memory is reached, bit 4 (ASM) of the device event status
register (DSR) is set.
For adr=0, it is set to OFF.
RNM? Response: RNMdddd
RDN adr1,adr2 Specifies the memory range to be read by RDT?. *9
(0, 0) *5
adr1: First recall data number (0 to 3999)
adr2: Last recall data number (0 to 3999)
RDN? Response: RDN adr1,adr2 *9
adr1,adr2: <dddd>
RDT? Reads out the memory data in the specified range. *9
(0)
Response: The comma-separated data in the specified
range is output in the format described in
Section “6.5 Data Output Format.”
• If data does not exist in the specified
number, the output
becomes <EE +8.30>.
• Executing this command releases the
recall execution status.
ZERO
measurement ZM Executes ZERO measurement by using the currently set
function, range and integration time.
Temperature
unit TPU0 Temperature unit

C
TPU1 Temperature unit

F
TPU2 Temperature unit K
TPU? Response: TPU0 to TPU2
Resistance bulb RTD0 Pt100
RTD1 JPt100
RTD? Response: RTD0 to RTD1
System User parameter STP0 Saves setting parameters to the non-volatile memory, User-0.
STP1 Saves setting parameters to the non-volatile memory, User-1.
STP2 Saves setting parameters to the non-volatile memory, User-2.
STP3 Saves setting parameters to the non-volatile memory, User-3.
SINI Sets the factory default settings to USER0 through User-3.
RCLP0 Loads data from the non-volatile memory, User-0 as setting
parameters.
RCLP1 Loads data from the non-volatile memory, User-1 as setting
parameters.
RCLP2 Loads data from the non-volatile memory, User-2 as setting
parameters.
RCLP3 Loads data from the non-volatile memory, User-3 as setting
parameters.
RINI Loads the factory default settings as setting parameters.
Initialization *RST Initializes parameters.
(Items except *6 are default values.)
CDV Device clear (Do not write with other commands in succession
in one line.)
*5: Not initialized by the RINI command.
*6: Not initialized by the RINI or *RST command.
*9: Not specified by USB.
Item Command Description
Default Operation
During
calibration
Power
ON
Factory
shipment
DC
OPR/SUS
Sweep
OPR/SUS