ADCMT 4601 I-V Meter, Руководство по эксплуатации

Страница: 86 / 236

4601 I-V Meter Operation Manual
4.2.10 MENU Key (Parameter Setting)
4-6
3) Reverse Switches reverse sweep ON or OFF.
Off: One-way sweep
On: Round sweep
4) Return to Bias Selects whether sweep stops at the bias value or stop value.
Off: Stop value
On: Bias value
5) Step /Trigger Sets the step count per trigger to between 1 and to 2000 when the sampling is
set to HOLD.
C) SWEEP VALUE Sets the sweep source value.
The setting parameters vary depending on the sweep type as follows:
1-slope linear sweep:
1) Bias Value Sets the bias value.
2) First Value Sets the start value.
3) Last Value Sets the stop value.
4) Step Count Sets the step count.
2-slope linear sweep:
1) Bias Value Sets the bias value.
2) First Value Sets the start value.
3) Second Value Sets the start value for the second slope.
4) Last value Sets the stop value.
5) Cnt. @ 1st-2nd Sets the step count for the first slope.
6) Cnt. @ 2nd-Last Sets the step count for the second slope.
3-slope linear sweep:
1) Bias Value Sets the bias value.
2) First Value Sets the start value.
3) Second Value Sets the start value for the second slope.
4) Third Value Sets the start value for the third slope.
5) Last Value Sets the stop value.
6) Cnt. @ 1st-2nd Sets the step count for the first slope.
7) Cnt. @ 2nd-3rd Sets the step count for the second slope.
8) Cnt. @ 3rd-Last Sets the step count for the third slope.