ADCMT 4601 I-V Meter, Руководство по эксплуатации

Страница: 83 / 236

4601 I-V Meter Operation Manual
4.2 Panel Key Descriptions
4-3
4.2 Panel Key Descriptions
This section describes the function of the panel keys and the parameters in the menu in alphabetical order.
4.2.1 CURSOR Key (Cursor Moving)
4.2.2 DATA ENTRY Keys (Source Value Setting)
The DATA ENTRY keys are used to change the voltage source value, the current source values, the limit
values and the parameters to be input.
4.2.3 DOWN Key (Voltage Source or Current Limit Range Down)
Decreases the voltage source range or current limit range by one.
However, it is impossible to decrease to the range that cannot output the currently set source value.
4.2.4 DOWN Key (Measurement Range Down)
Decreases the external voltage measurement range or referenced cell current range by one.

keys Moves the cursor (highlight) that indicates a digit of the source value
to the right or left.
Selects items on the menu screen.

,

keys Increases or decreases a figure at the digit indicated by the cursor.
Moves up and down the hierarchy on the menu screen.
0 to 9 keys Enters numeric data from 0 to 9.
• key Enters a decimal point.
+/- key Sets the polarity to positive or negative.
CE key Cancels input data for data setting.
m key Sets unit "m" for numeric data.

key Sets unit "

" for numeric data.
ENTER key Finishes data entry and stores the parameter.
LOCAL key Switches from remote operation to local operation.