ACU-RITE MILLPWR G2, Техническое руководство

Страница: 461 / 546

6.10 Operating Times and System Times 461
Modul 9192 Transfer the operating hours counter
The module reads the given PLC or NC operating hours counter.
The current value is transferred in seconds. If the value is greater than
2 147 483 648 (approx. 69 years), a negative number will be transferred.
Call:
PS b/w/d/k <>Number of the operating time>
–3:
Control on
––2: Machine on
–1:
Program run
0 to 7: PLC operating hours counters 1 to 8
CM 9192
PS b/w/d <>Current time [s]>
–1: Error
Error code:
Modul 9193 Transfer the operating hours counter
The module overwrites the given PLC or NC operating hours counter. The old
value is lost irretrievably.
The value of the NC operating hours counters may only be changed in excep-
tional cases (e. g. when the control is exchanged).
The time for Control on cannot be overwritten.
Transfer all values greater than 2 147 483 648 (approx. 69 years), as negative
numbers.
Call:
PS b/w/d/k <>Number of the operating time>
–2:
Machine on
–1:
Program run
0 to 7: PLC operating times 1 to 8
CM 9193
PS b/w/d <>New time [s]>
–1: Error
Error code:
Marker Value Meaning
NN_GenApiModule
Error 0 PLC operating time was read
1 Incorrect transfer value, or module was not
called in a spawn job or submit job
Marker Value Meaning
NN_GenApiModule
Error 0 PLC operating time was overwritten
1 Incorrect transfer value, or module was not
called in a spawn job or submit job