ACU-RITE MILLPWR G2, Техническое руководство

Страница: 311 / 546

5.12 Reference Marks 311
5.12.3 Defining the Process of Traversing the Reference Marks
The parameter object CfgReferencing is not required for:

Virtual axes (MP_axisMode=Virtual)
You define the process of traversing the reference marks in the following
machine parameters:
 In MP_refDirection and MP_refFeedHigh (for rotary encoders also in
MP_refFeedLow) you define the direction and velocity for traversing the ref-
erence marks.
 In MP_refAxis you define the sequence of axes for traversing the reference
marks.
 In MP_refType you select the type of reference marks for each axis.
MP_refType
Functional sequence for traversing the reference mark
Format: Selection menu
Selection:
[ Switch, changing Dir ]
For linear axes with speed encoder; reference run with NC start
[ Switch, no changing Dir ]
For linear axes with speed encoder; reference run with NC start
[ without Switch ]
For spindle, rotary table with angle encoder; reference run with
NC start
[ distance coded ]
For distance-coded linear encoders; reference run with NC start
[ distance coded + on the fly ]
For distance-coded linear encoders; reference run with axis-
direction keys or NC start
[ without on the fly ]
For spindle; reference run with M3, M4
[ Endat Encoder ]
For axes with EnDat encoder; reference-mark traverse not nec-
essary
Settings in the configuration editor:
Axes
ParameterSets
Key for parameter set
CfgReferencing
refType
refSwitchActive
refFeedLow
refFeedHigh
refDirection