ACU-RITE MILLPWR G2, Техническое руководство

Страница: 137 / 546

4.7 Overview of the Machine Parameters 137
revoke
104113
(optional parameter)
Numbers of functions whose effect will be can-
celed by the output of the strobe.
In the list, enter the numbers of the functions whose
effect will be canceled when this code is output.
The parameter is effective for implementing the state
of the function in the status display and during block
scan.
Format: List [0...10]
Input: 0 to 9 999
RESET
LEVEL3
blockSearch
104115
Code output also during during the block scan
Format: Selection menu
Input: TRUE or FALSE

TRUE :
Function is also output during the block scan.

FALSE :
Function is not output during the block scan. The
function is collected and restored.
Default: FALSE
RESET
LEVEL3
sync
104116
Synchronization of function with the NC
Format: Selection menu
Input:

SYNC_EXEC :
The function is synchronized with program run. The
output of movement by the interpolator is stopped;
then the function is executed.
Please note:
After this function has been executed, the look-
ahead calculation continues using the position
values that were active
before execution of the
function. This setting is not suitable for functions
executing e.g. PLC-positioning movements for
example!

SYNC_CALC :
The function is synchronized with program calcula-
tion. The interpretation of the NC program is stop-
ped and the path is calculated internally; then the
function is executed. The S function is completely
executed. After successful execution has been ack-
nowledged, calculation continues with new position
values.

ASYNC :
The function is output without synchronization.
RESET
LEVEL3
Parameter
MP number Function and input Behavior
Access
SW version