ACU-RITE MILLPWR G2, Техническое руководство

Страница: 296 / 546

296 ACU-RITE Technical Manual MILLPWR
G2

PLC Module 9035 (Reading the status information)
The module supports status information #0 to #3, #5 to #8 and #16 as well:
Transferred number Return code
0 Main operating mode of editor 0:
Programming and Editing
1: Test Run
1 Main operating mode of machine 0: Traverse Reference Points
1:
Manual Operation
2: Electronic Handwheel
3:
Positioning with Manual Data Input
4: Program Run, Single Block
5:
Program Run, Full Sequence
2 Operating mode in front of editor 0: None (main operating mode active)
1: MOD active
2: Program management/external interfaces active
3: MP editor active
4: PLC programming active
3 Operating mode in front of machine 0: None (main operating mode active)
1: MOD active
2: Program management/external interfaces active
3: Tool table selected
4: Pocket table selected
5: Other table editor active
5 Selected file in Programming and Edi-
ting
or
Test Run
0: No file
1: *.H (conversational NC PGM)
2: *.I (ISO NC PGM)
3: *.T (tool table)
4: *.D (datum table)
5: *.P (pallet table)
6: *.A (ASCII file)
7: *.TCH (pocket table)
6 Selected file in
Program Run, Full
Sequence and Program Run, Single
Block
0: No file
1: *.H (conversational NC PGM)
2: *.I (ISO NC PGM)
7 Selected axis for actual position cap-
ture in
Programming and Editing
mode
0: X axis
1: Y axis
2: Z axis
3: IV axis
4: V axis
5: VI axis
6: VII axis
etc.
8 Selected machine axis
(for actual-position-capture) 0: X axis
1: Y axis
2: Z axis
3: IV axis
4: V axis
5: VI axis
6: VII axis
etc.
16 Input format of the $MDI file 0: *.H (conversational NC PGM)
1: *.I file (ISO NC PGM)