ABB FCAN-01, Руководство пользователя

Страница: 78 / 176

78 Start-up
The start sequence for the parameter example above is given
below.
Control word:
•
Reset the fieldbus communication fault (if active).
•
7Eh (126 decimal) → SWITCH ON DISABLED
•
7Fh (127 decimal) → OPERATION ENABLED
Configuring the master station
After the adapter module has been initialized by the drive, the
master station must be prepared for communication with the
adapter module. Examples of an ABB AC500 PLC are given
below. If you are using another master system, refer to its
documentation for more information.
The examples can be applied to all drive types compatible with the
adapter module.

EDS files
The Electronic Data Sheet (EDS) files specify the device properties
for the CANopen master (client). The EDS files for the FCAN-01
CANopen adapter module contain information on the supported
communication objects. The EDS files for ABB Drives are available
at the Document library ( www.abb.com/drives ).
20.01 Ext1 commands 21 = Fieldbus A Selects the fieldbus A interface
as the source of the start and
stop commands for external
control location 1.
22.11 Speed ref1
selection AI1 scaled
2)
Analog input as the source for
reference 1
1)
Automatically detected
2)
Example
Drive parameter Setting for ACS880
drives Description