ABB FCAN-01, Руководство пользователя

Страница: 75 / 176

Start-up 75
Starting up ACS880 drives
1. Power up the drive.
2. Enable the communication between the adapter module and
the drive by setting parameter 50.01 FBA A enable to Enable.
3. With parameter 50.02 FBA A comm loss func , select how the
drive reacts to a fieldbus communication break.
Note: This function monitors both communication between the
fieldbus master and adapter module and communication
between the adapter module and drive.
4. With parameter 50.03 FBA A comm loss t out , define the
time between communication break detection and the selected
action.
5. Select application-specific values for parameters
50.04 … 50.11 . Examples of appropriate values are shown in
the tables below.
6. Set the FCAN-01 configuration parameters in drive parameter
group 51 .
At minimum, set the required node address in parameter 51.02
Node ID , the required bit rate in 51.03 Bit rate , select source
of the PDO configuration in 51.04 Conf location and the
communication profile in 51.05 Profile .
7. If the group 51 is selected as the source for the PDO
configuration, select the application specific configuration for
the PDOs with parameters
51.07 … 51.24 .
8. Define the process data transferred to and from the drive in the
FCAN-01 configuration parameter groups 52 and 53 .
Note: If the PDO configuration is written from the PLC, the
parameters 51.07 … 51.24 are not used and the parameter
groups 52 and 53 display the process data selected in the
PLC.