ABB ACS280, Руководство по прошивке, Страница: 114 / 430

114 Parameters
Brake command Bit 0 of
44.01 Brake control status
. 22
Ext2 active Bit 11 of
06.16 Drive status word 1
. 23
Remote control Bit 9 of
06.11 Main status word
. 24
Supervision 1 Bit 0 of
32.01 Supervision status
. 33
Supervision 2 Bit 1 of
32.01 Supervision status
. 34
Supervision 3 Bit 2 of
32.01 Supervision status
. 35
Start delay Bit 13 of
06.17 Drive status word 2
. 39
RO/DIO control word
bit0
Bit 0 of
10.99 RO/DIO control word
. 40
Event word 1 Parameter
04.40 Event word 1
. 53
User load curve Bit 3 (Outside load limit) of
37.01 ULC output status
word
(see page
220
).
61
RO/DIO control word Maps to corresponding bit in parameter
10.99
RO/DIO control word
. For example, Bit 0 of
10.99
RO/DIO control word
controls RO1, Bit 8 of
10.99
RO/DIO control word
controls DO1, and so on.
62
Other [bit]
Source selection (see
Terms and abbreviations
). -
11.07 DO1 ON delay
Defines the on (activation) delay for digital
input/output DO1 (when used as a digital output or
digital input).
0.00 s
0.0 … 3000.0 s Activation delay for DO1. 10 = 1 s
11.08 DO1 OFF delay
Defines the deactivation delay for digital
input/output DO1 (when used as a digital output or
digital input). See parameter
11.07 DO1 ON delay
.
0.00 s
0.0 … 3000.0 s Deactivation delay for DO1. 10 = 1 s
11.13 AI1/DI3 configuration
Selects whether DI3 is used as a digital input or
analog Input.
Analog input
11.17 AI2/DI4 configuration
Selects whether DI4 is used as a digital input or
analog Input.
Analog input
No. Name/Value Description Default
FbEq 16
Index Name Description
0 Digital input DIO pin used as digital input.
3 Analog input DIO pin used as Analog input.
Index Name Description
0 Digital input DIO pin used as digital input.
3 Analog input DIO pin used as Analog input.