ABB ACH550-BCR, Руководство пользователя

Страница: 93 / 642

ACH550-UH User’s Manual 1-89
Parameters
0305
FAULT WORD 1 - 1 -
Read-only copy of the Fault Word 1.
• When a fault is active, the corresponding bit for the active fault is set in the Fault Words.
• Each fault has a dedicated bit allocated within Fault Words.
• See section
Fault listing
on page
1-280
for a description of the faults.
• The control panel displays the word in hex. For example, all zeros and a 1 in Bit 0 displays as 0001. All zeros and
a 1 in Bit 15 displays as 8000.
0306
FAULT WORD 2 - 1 -
Read-only copy of the Fault Word 2.
• See parameter 0305.
0307
FAULT WORD 3 - 1 -
Read-only copy of the Fault Word 3.
• See parameter 0305.
Group 03: Actual Signals
Code Description Range Resolution Default S
Bit # 0305,
FAULT WORD
1 0306,
FAULT WORD
2 0307,
FAULT WORD
3
0 OVERCURRENT Obsolete EFB 1
1 DC OVERVOLT THERM FAIL EFB 2
2 DEV OVERTEMP OPEX LINK EFB 3
3 SHORT CIRC OPEX PWR INCOMPATIBLE SW
4 Reserved CURR MEAS USER LOAD CURVE
5 DC UNDERVOLT SUPPLY PHASE Reserved
6 AI1 LOSS ENCODER ERR Reserved
7 AI2 LOSS OVERSPEED Reserved
8 MOT OVERTEMP Reserved Reserved
9 PANEL LOSS DRIVE ID Reserved
10 ID RUN FAIL CONFIG FILE System error
11 MOTOR STALL SERIAL 1 ERR System error
12 CB OVERTEMP EFB CON FILE System error
13 EXT FAULT 1 FORCE TRIP System error
14 EXT FAULT 2 MOTOR PHASE System error
15 EARTH FAULT OUTP WIRING Param. setting fault