manualshive.com logo in svg

ABB ACH550-BCR, Руководство пользователя

Поделиться
Скачать
ABB ACH550-BCR Скачать руководство пользователя страница 263

ACH550-UH User’s Manual

1-259

Fieldbus adapter

Fieldbus adapter

Overview

The ACH550 can be set up to accept control from an external system using standard 
serial communication protocols. When using serial communication, the ACH550 can 
either:

• Receive all of its control information from the fieldbus, or 

• Be controlled from some combination of fieldbus control and other available 

control locations, such as digital or analog inputs, and the control panel.

Two basic serial communications configurations are available:

• Embedded fieldbus (EFB) – See 

Embedded fieldbus

 on page 

1-185

.

• Fieldbus adapter (FBA) – With one of the optional FBA modules in the drive’s 

expansion slot 2, the drive can communicate to a control system using one of the 
following protocols:

– Profibus-DP®
– LonWorks®
– CANopen®
– DeviceNet®
– ControlNet®
– Ethernet®

The ACH550 detects automatically which communication protocol is used by the 
plug-in fieldbus adapter. The default settings for each protocol assume that the 
profile used is the protocol’s industry-standard drive profile (e.g. PROFIdrive for 
PROFIBUS, AC/DC Drive for DeviceNet). All of the FBA protocols can also be 
configured for the ABB Drives profile.

Configuration details depend on the protocol and profile used. These details are 
provided in a user’s manual supplied with the FBA module. 

 Fieldbus

Fieldbus Controller

Other Devices

Connect using either:

• Standard embedded fieldbus (EFB) at 

terminals X1:28…32

• Fieldbus adapter (FBA) module 

mounted in slot 2 (option Rxxx)

Содержание ACH550-BCR



































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды