ABB ACH550-BCR, Руководство пользователя

Страница: 52 / 642

1-48 ACH550-UH User’s Manual
Start-up
To complete the control connections by manually entering the parameters, see
Parameters Mode
on page
1-35
.
For detailed hardware description, see the
Technical data
section on page
1-297
.
Note:
The current parameter value appears below the highlighted parameter.
Note:
To view the default parameter value, press the UP/DOWN buttons
simultaneously.
Note:
The most typical and necessary parameters to change are parameter groups
99 Start-up data, 10 Start/Stop/Dir, 11 Reference Select, 20 Limits, 21 Start/Stop, 22
Accel/Decel, 26 Motor Control and 30 Fault Functions.
Note:
To restore the default factory settings, select the application macro HVAC
Default.
3
Select the appropriate parameter group
with the UP/DOWN buttons and select
SEL
4
Select the appropriate parameter in a
group with the UP/DOWN buttons. Select
EDIT to change the parameter value.
5
Press the UP/DOWN buttons to change
the parameter value.
6
Select SAVE to store the modified value or
select CANCEL to leave the set mode.
Any modifications not saved are
cancelled.
7
Select EXIT to return to the listing of
parameter groups, and again to return to
the main menu.