A&D BA-T Series, Инструкция по эксплуатации

Страница: 47 / 220

47
Formulation function
Formulation function usage
This is the function to store a recipe consisting of the sample to be weighed, the target weight, and the
tolerance of the amount to be weighed with the balance, and to weigh according to the recipe.
If you configure this display, the HOME screen changes to formulation mode.
Caution
The contents of the stored recipes and sample information will be cleared by initializing the balance.
Display settings: HOME key
APP button [Application] settings screen
Application selection button Select [Formulation mode]
HOME key [Formulation mode] screen
1 5
2
3
4
Name Description
1 Formulation mode Displayed when in the formulation mode.
2
Go to the recipe list
button
Displays the [Recipe list] screen.
The name of the currently selected recipe is displayed here.
3 Skip button
Skips tare weighing and displays the [Formulation mode - Sample weighing]
screen.
If the recipe is incomplete, the button is disabled.
4 SAVE button
Weighs the tare value and displays the [Formulation mode - Sample weighing]
screen.
If the recipe is incomplete, the SAVE button
is disabled.
If the weighing value is negative, it is recorded as 0 g.
5
Display indicating that
the recipe is incomplete
If the selected recipe is incomplete:
The message “The recipe is incomplete. Please check the recipe details.” is
displayed and the Skip button
and SAVE button are disabled.
Check the recipe name and the target value and tolerance of the sample
registered in the recipe.
If the selected recipe is complete:
The message “Please place item to be tared” is displayed and the Skip button
and SAVE button are enabled.
This is the screen for [Formulation mode]. This mode can be used only with the unit "g".
Re-zero will be applied automatically when the screen changes to [Formulation mode].
If the tare weight plus sample target value exceeds the capacity, the message "Overload error" is displayed
for the item indicated by 5 in the figure above and the SAVE button is disabled.