VIGIL Software v8.8 User Manual |
VISIX V-Series All-in-One Cameras
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
65
STREAM SETTINGS
Select your desired stream profile tab (First/Main, Second/Sub) and check-off
Enable Streaming
to
enable the chosen stream. In most cases, high quality image settings are reserved for the main/first
stream, while lower quality, less bandwidth-intensive settings are reserved for the second/sub stream.
The following settings can be configured for your chosen stream:
Stream Setting
Description
Video Codec
Select the stream’s video codec from the options in the drop-down menu.
Resolution
Select the stream’s video resolution from the options in the drop-down
menu.
Max FPS
Set the maximum Frames per Second value for the selected stream.
GOP
Set the Group of Picture value (I-Frame interval) for the selected stream.
Profile Identification
Bit Rate Control
Configure bit rate settings for the selected streams:
Variable Bitrate (VBR) –
Have the camera adjust bitrate for the
selected stream based on an image quality preference. Choose
your preference from the drop-down.
Constant Bitrate (CBR) –
Configure a target bitrate for the
selected stream.
Steps:
1).
Click the
Show Profile List
button for a list of preexisting encoder profiles. Existing profiles can
be loaded by selecting them from the list and clicking
Load Profile Settings
. Encoder profiles
form
(Setup Tab>Video Menu>Encoder
Profile)
.
2).
Click
Apply
to save new settings changes.
