VIGIL Software v8.8 User Manual |
VISIX V-Series All-in-One Cameras
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
63
ENCODER PROFILE
Steps:
1).
Opening the
Setup Tab>Video
drop-down menu and clicking the
Encoder Profile
link will open
the
Encoder Profile
settings page.
Figure 7-21
: Setup Tab – Video Menu –Encoder Profile Settings
2).
From the
Encoder Profile
settings page, a user may
Add
,
Copy
,
Modify
or
Remove
an
Encoder
Profile.
An Encoder profile is a stream settings profile that delineates camera stream settings
based on pre-configured customized settings.
3).
To
Copy…
or
Remove….
an existing profile, select the profile from the list and click the
corresponding button.
For information on adding or modifying a profile, proceed through the following section of this manual.
ADDING OR MODIFYING AN ENCODER PROFILE
Steps:
1).
To create or modify a new encoder profile, click the
Add…
button (if modifying, select the
desired profile from the list and click
Modify…
). This will deploy the below stream settings
form.
Figure 7-22
: Setup Tab – Video Menu –Encoder Profile Settings – Adding/Modifying an Encoder Profile
