VIGIL Software v8.8 User Manual |
VISIX V-Series All-in-One Cameras
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
53
2).
From the
TCP/IP
settings
page, a user may edit a camera’s
TCP/IP settings
.
This includes
all
configurable settings from the
Basic Tab>Camera Configuration> Network
settings page (
IP
Settings, DNS Server settings
) as well as the ability to enable IPv6 and configure host name
and local link address details.
Network Setting
Description
IP Address
Configuration
Select the method by which the cameras will obtain an IP address:
Obtain an IP Address via DHCP
– Select this method to have your router’s
DHCP function automatically assign the camera’s network connection
settings. This method is enabled by default. The automatically-generated
IP, Subnet Mask and Gateway
addresses will be listed directly
underneath.
Use the following IP Address (Manual Configuration
) – Select this option
to manually enter network connection settings.
IP Address, Subnet Mask
and Gateway Addresses
can be manually entered directly underneath
this setting. Clicking the
Test
button will confirm the validity of the
network connection addresses you have entered.
To enable IPv6 protocol, click
Enable IPv6
. For more information on IPv6
settings, see
, below.
DNS Configuration
Enter in
Primary and Secondary DNS Server
connection information.
Host Configuration
Configure the device host name.
Link – Local Address
Checking-off
Enable Auto-configuration Link-Local Address
will generate
an alternate internal IP address which can also be used to connect to the
camera, access the UI via browser, etc... when on the same network as
the camera.
BASIC CONFIGURATION MENU - TCP/IP SETTINGS - IPV6 SETTINGS CONFIGURATION
Steps:
a.
When the enable IPv6 box is checked, IPv6 settings fields will deploy (pictured below).
Figure 7-6
: Setup Tab – Basic Configuration Menu – TCP/IP Settings – IPv6 Settings
