VIGIL Software v8.8 User Manual |
VISIX V-Series All-in-One Cameras
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
86
WEB SERVER SETTINGS
Steps:
1).
Opening the
Setup Tab>Network Configuration
drop-down menu and clicking the
TCP/IP
link
will open the network
TCP/IP
settings page.
Figure 7-47
: Setup Tab –Network Configuration Menu – Web Server Settings
2).
From the
Web Server
settings form, a user may configure the camera’s web server connection
settings. Configurable settings include choosing the hypertext protocol
(HTTP or HTTPS)
,
assigning separate port numbers for each protocol and choosing the
Authentication Type
(basic or digest)
for the active protocol.
3).
Click
Apply
to save any new changes to the
Web Server
settings.
NTP SETTINGS
Steps:
1).
Opening the
Setup Tab>Network Configuration
drop-down menu and clicking the
NTP
link will
open the network
NTP
settings page.
Figure 7-48
: Setup Tab –Network Configuration Menu – NTP Settings
2).
From the
NTP
settings page, a user may enter NTP server connection info for time
synchronization purposes. Up to four NTP servers can be added.
3).
After entering a time server address, click the
Test
button to confirm a connection between
the camera and the selected NTP Server. If the test fails, confirm you have entered in the
correct address for the NTP Server.
4).
Click
Apply
to save settings changes.
