VIGIL Software v8.8 User Manual |
VISIX V-Series All-in-One Cameras
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
56
STREAM SETTINGS
Select your desired stream profile tab (First/Main, Second/Sub) and check-off
Enable Streaming
to
enable the chosen stream. In most cases, high quality image settings are reserved for the main/first
stream, while lower quality, less bandwidth-intensive settings are reserved for the second/sub I stream.
The following settings can be configured for your chosen stream.
Stream Setting
Description
Video Codec
Select the stream’s video codec from the options in the drop-down menu.
Resolution
Select the stream’s video resolution from the options in the drop-down
menu.
Max FPS
Set the maximum Frames per Second value for the selected stream.
GOP
Set the Group of Picture value (I-Frame interval) for the selected stream.
Profile Identification
Bit Rate Control
Configure bit rate settings for the selected streams:
Variable Bitrate (VBR) –
Have the camera adjust bitrate for the
selected stream based on an image quality preference. Choose
your preference from the drop-down.
Constant Bitrate (CBR) –
Configure a target bitrate for the
selected stream.
Steps:
1).
Click the
Show Profile List
button for a list of preexisting encoder profiles. Existing profiles can
be loaded by selecting them from the list and clicking
Load Profile Setting
s. Encoder profiles
form (
Setup Tab>Video Menu>Encoder
Profile
).
2).
Click
Apply
to save new settings changes.
SNAPSHOT SETTINGS
Steps:
1).
Click the Snapshot tab to open the
Snapshot
settings. Snapshot (still image) settings can be
configured from this form.
Figure 7-9
: Setup Tab – Basic Configuration Menu –Snapshot Stream Settings
2).
Click the
Enable
button to enable camera still shots via the camera browser interface (VIGIL
utilities interfaced with the device such as VIGIL Client can take snapshots regardless of the
camera settings).
