3xLogic VX-2A-B-IWD (R), Руководство пользователя

Страница: 107 / 140

VIGIL Software v8.8 User Manual | VISIX V-Series All-in-One Cameras
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
107
VCA Zone – Rule Config.
Description
Object Class Filter
Create an Object Filter . Object filters can be used to filter
predefined objects from triggering an analytics event. Filters can
also be configured to trigger an event ONLY when a specific object
class is detected within a zone.
Include/Exclude – Select Include to apply analytics only to objects of
the selected classification. Select Exclude to exclude objects of the
selected classification from triggering analytics events.
To create an Object Class Filter , check off a filter and choose the
object class in the Value field drop-down ( Filter 0 is actively filtering
the Clutter object class in the below example).
For information on configuring object classes, see Classification
Settings.
Presence
Enable this rule to trigger an analytics event whenever an object
comes into contact with any portion of the zone. The zone will
remain triggered so long is presence is detected.
Enter
Enable this rule to trigger an analytics event whenever an object
enters the zone.
Exit
Enable this rule to trigger tan analytics event whenever an object
exits the zone.
Appear
Enable this rule to trigger an analytics event whenever an object
appears within the zone.
Disappear
Enable this rule to trigger an analytics event whenever an object
disappears from the zone.
Stopped
Enable this rule to trigger an analytics event whenever an object has
stopped moving within the analytics zone for equal to or longer than
the defined
Time (Seconds).
Dwell
Enable this rule to trigger an analytics event whenever an object has
dwelled within the zone longer than the defined
Threshold
(Seconds).
Direction Filter
Enable this rule to trigger analytic events based on directional
movement through the zone. A directional indicator will be overlaid
over the zone. Adjust the
Direction and Acceptance angle to
configure a direction spectrum. Only objects travelling through the
zone within this directional spectrum will trigger an analytics event.
Speed Filter
Enable this rule to trigger an analytics events whenever an object
travels through the zone within the defined speed range
Configure a Lower Bound (km/h) and Upper Bound (km/h) speed
value to define your speed range.