VIGIL Software v8.8 User Manual |
VISIX V-Series All-in-One Cameras
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
33
VIGIL VCM - ADDING A V-SERIES ALL-IN-ONE CAMERA
Steps:
1).
To add a VISIX All-in-One Camera to VCM for central management and health-monitoring
purposes, launch a VCM Client.
2).
Log into a VCM Server.
Figure 4-25:
Adding an All-in-One Camera to VCM
3).
Click the
Health Monitor
button.
4).
Select (left-click) a
Server Group
from the
Server Groups
sidebar to. The
All-in-One
camera
will be added to this group.
5).
Click the
Add Server
button (only available after selecting an applicable
Server Group
). This
will launch the
Add/Edit Server
form. VISIX All-in-One devices are considered edge recording
devices, and thus are recognized as their own Server within the VIGIL suite, including VCM.
6).
Check off
VIGIL Camera.
This will indicate to VCM that the device you are adding is a VISIX all-
in-One camera.
7).
Check-off
Use VIGIL Connect
.
Alternatively, if you wish to use traditional network connection
criteria, leave
Use VIGIL Connect
disabled and enter in
IP/DNS Name
and
Port
info (if using
standard network connection values, also ignore step 8 of these instructions) for the device.
8).
Enter the VIGIL Connect alias of the All-in-One camera in the
Serial No./Alias
field.
9).
After entering an alias, click Test VIGIL Connect to ensure successful communication with the
VIGIL Connect system.
10).
Fill in all remaining required fields and click
OK
to add the camera to your list of centrally
managed VIGIL Servers/VISIX All-in-One cameras.
If you experience issues connecting to the All-in-One camera in VCM, confirm the alias that has been
entered is correct. If all settings appear to be correct, contact 3xLOGIC for further instruction or
reference
Tech Tip 140028 VIGIL Connect Troubleshoot Guide
