VIGIL Software v8.8 User Manual |
VISIX V-Series All-in-One Cameras
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
72
FACE DETECTION
Steps:
1).
Opening the
Setup Tab>Event Configuration
drop-down menu and clicking the
Face Detection
link will open the
Face Detection
settings page.
Figure 7-31
: Setup Tab – Event Configuration Menu – Face Detection Settings
2).
From the
Face Detection
settings page, a user may draw up to four facial detection zones, and
activate each as necessary.
NOTE:
Do not confuse
Facial Detection
with
Facial Recognition
.
Face detection merely detects the presence of
a human face. There is no Facial Recognition algorithm. The camera cannot be configured to recognize
specific faces.
3).
Check off the
Enable
column box for the desired zone. This will deploy the zone over the
image. Resize the zone as desired.
4).
A
Name
and
Description
value can be assigned to each zone.
5).
Click
Apply
to save any settings changes.
