VIGIL Software v8.8 User Manual |
VISIX V-Series All-in-One Cameras
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
91
MDNS SETTINGS
Steps:
1).
Opening the
Setup Tab>Network Configuration
drop-down menu and clicking the
mDNS
link
will open the network
mDNS
settings page.
Figure 7-54
: Setup Tab –Network Configuration Menu – mDNS Settings
NOTE:
The
multicast Domain Name System (mDNS)
resolves host names to IP addresses within small networks
that do not include a local name server. It is a zero-configuration service, using essentially the same
programming interfaces, packet formats and operating semantics as the unicast Domain Name
System (DNS).
2).
From the mDNS settings page, a user may check-off
Enable
to enable mDNS for this camera
and assign a device
Name.
Click
Apply
to save settings changes.
WS-DISCOVERY SETTINGS
Steps:
1).
Opening the
Setup Tab>Network Configuration
drop-down menu and clicking the
WS
Discovery
link will open the network
WS Discover
settings page.
Figure 7-55
: Setup Tab –Network Configuration Menu – WS-Discovery Settings
2).
Check-off the
Enable
box to enable WS Discovery (Web Services Dynamic Discovery).
3).
Click
Apply
to save settings changes.
