VIGIL Software v8.8 User Manual |
VISIX V-Series All-in-One Cameras
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
122
Available settings include:
Request Command
Description
Time
Fill out the
To
and
From
fields to designate a time range for the counter
report.
Counter ID
Select the counter to report data on. An individual counter may be chosen
by selecting its corresponding ID (1-19). Select
Active
to report on only
active counters. Select
All
to report on all counters.
Table (Sampling)
Select the table to use in the report. Each table features a separate
Sampling Interval and Roll-Over Count
.
for
more information on configuring counter report tables.
Sorting Order
Select whether the results should be displayed in
Ascending
or
Descending
order.
Value Type
Select whether the displayed results should be
Absolute
value of each
counter, or the
Difference
between counters.
4).
Under the
Request
section, select the report style. Available styles include:
Table, Bar
and
CSV
. Please note, a
Counter Report
cannot be generated without enabling
Database Service
on the
. Please enable
Database Service
to enable counter report
generation.
5).
After selecting a style, a pop-up will open with your report and a URL link to the report will
also be available in the
Request URL
field.
DATABASE SERVICE TAB – COUNTER REPORTING SETTINGS
Steps:
1).
From the
Database Service
tab, a user may enable
Database Service
(required for counter
reporting and counter report email notifications) and configure related settings.
Figure 7-77
: Setup Tab –VCA Menu –Counter Reporting Settings– Database Service Tab
