ZyXEL Communications ALC1024, User Manual

Page: 61 / 255

Commands with EEC
ADSL Commands 5-3
where
<port number> =
A port number, from 1 to 24.
The
disable port
command forcibly disables the specified ADSL port.
All ADSL ports are disabled by default. A port must be enabled before data transmission can
occur. An enabled but disconnected ADSL port generates more heat than an operating port. To
minimize heat generation and to enhance reliability, remember to disable a port when it is not in
use.
5.7.3 Disable Ports Command
Syntax:
192.168.1.1 adsl> disable ports
The
disable ports
command forcibly disables all ADSL ports.
All ADSL ports are disabled by default. A port must be enabled before data transmission can
occur. An enabled but disconnected ADSL port generates more heat than an operating port. To
minimize heat generation and to enhance reliability, remember to disable a port when it is not in
use.
5.7.4 Enable Port Command
Syntax:
192.168.1.1 adsl> enable port <port number>
where
<port number> =
A port number, from 1 to 24.
The
enable port
command forcibly enables the specified ADSL port.
All ports are disabled by default. A port must be enabled before data transmission can occur. An
enabled but disconnected ADSL port generates more heat than an operating port. To minimize
heat generation and to enhance reliability, remember to disable a port when it is not in use.
5.7.5 Enable Ports Command
Syntax:
192.168.1.1 adsl> enable ports
The
enable ports
command forcibly enables all ADSL ports.
All ADSL ports are disabled by default. A port must be enabled before data transmission can
occur. An enabled but disconnected ADSL port generates more heat than an operating port. To