ZyXEL Communications ALC1024, User Manual

Page: 37 / 255

Commands with EEC
Commands with EEC Introduction 3-3
Table 3-1 Commands with EEC
COMMANDS DESCRIPTION
MODULE COMMAND ATTRIBUTES
<port> <any | ip | pppoe> This command sets the type of packets
that a port is allowed forward.
filter This command displays the filtering
database.
filterage This command displays the filter age
time.
<seconds> This command sets the filter age time.
flush This command clears the filtering
database for all ports.
<portNo> This command clears the filtering
database on an individual port.
info This command shows bridge information.
interface files This command shows files opened by
upper layer.
info This command shows ether-support
driver information.
stats This command shows bridge upper
interface statistics.
stats reset This command resets bridge upper
interface statistics.
portfilter This command displays ports to forward
to.
<srcPort> <all | destPorts> This command sets ports to forward to.
status This command displays bridge
management statistics.
mfilter This command displays the multicast
filtering database.
fpvid This command displays default port VLAN
IDs in Fast Mode.
<portNo> <vid> This command sets a default port VLAN
ID in Fast Mode.
macfilter This command displays the MAC filtering
status and setting on all ports.
<portNo> This command displays the MAC filtering
status and setting on the specified port.
enable <portNo> This command enables the MAC filtering
mechanism.
disable <portNo> This command disables the MAC filtering
mechanism.
add <portNo> <mac> This command adds a source MAC
address from which to forward packets.