ZyXEL Communications ALC1024, User Manual

Page: 41 / 255

Commands with EEC
Commands with EEC Introduction 3-7
Table 3-1 Commands with EEC
COMMANDS DESCRIPTION
MODULE COMMAND ATTRIBUTES
speed <100 | 10> This command sets the operating speed
of the Ethernet port (100M or 10M).
status This command shows Ethernet link status
(auto-negotiation, duplex, speed).
save This command saves Ethernet settings.
event help This command shows help message of
event (data output to background)
command.
next This command shows the next page of
events.
previous This command shows the previous page
of events.
recent This command shows the latest page of
events.
show This command sets event as foreground
output.
unshow This command sets event as background
output.
exit This command ends the console or telnet
session.
flashfs
config This command displays the configuration
of the flash file system.
default This command shows the current
partition.
<partition> This command selects a partition as the
current flash file system.
fsck This command does a file system check
in the current partition.
<partition> This command does a file system check
in the specified partition.
format This command formats the current
partition.
<partition> This command formats the specified
partition.
id <n> This command shows the chip ID of the
n'th flash chip.
info This command shows file system
information.
partitions This command shows all partitions
information.