ZyXEL Communications ALC1024, User Manual

Page: 51 / 255

Commands with EEC
System Commands 4-1
Chapter 4
System Commands
This chapter describes the line card’s system-related commands.
4.1 System Commands Overview
Use the commands described in this chapter to configure system functions when you use the line card with the
Ethernet extension card.
4.2 Commonly Used Commands
This section shows you commonly used commands.
4.2.1 Uptime Command
Syntax:
192.168.1.1> uptime
This command shows the elapsed time the system has been running since the last reboot.
An example is shown next.
Figure 4-1 Uptime Command Example
4.2.2 Version Command
Syntax:
192.168.1.1> version
This command shows the system firmware version and date
4.2.3 Restart Command
Syntax:
192.168.1.1> restart
192.168.1.1> uptime
up 3 hours 42 minutes