ZyXEL Communications ALC1024, User Manual

Page: 42 / 255

Commands with EEC
3-8 Commands with EEC Introduction
Table 3-1 Commands with EEC
COMMANDS DESCRIPTION
MODULE COMMAND ATTRIBUTES
rewrite <file> This command rewrites the boot area with
the specified ISFS file.
trace This command shows the trace level in
the FLASHFS driver.
<level> This command sets the trace level in the
FLASHFS driver.
update This command commits ISFS files to the
current partition.
<partition> This command commits ISFS files to the
specified partition.
version This command shows the FLASHFS
driver’s version information.
wipe This command erases the current
partition.
<partition> This command erases the specified
partition.
fm
append <file> <text> This command appends text to the
specified file in the current file system.
cat <file> This command shows the contents of the
specified file in the current file system.
cp <src file> <dest file> This command copies a source file to a
destination file.
default <fs> This command sets the current file
system to either isfs or flashfs.
info This command shows the file system
information.
ls [ -l | -L ] This command shows all files in the
current file system.
mv <src file> <dest file> This command gives the source file the
same name as the destination file.
rm <file> This command removes a file.
version This command shows the version
information of file system.
adsl
config save This command saves configuration of
ADSL module to nonvolatile memory.
enable port <portNo> This command enables the specified
ADSL port.