ZyXEL Communications ALC1024, User Manual

Page: 229 / 255

Web Configurator with MSC
IEEE 802.1Q VLAN 30-3
Table 30-2 ALC Edit Static VLAN
LABEL DESCRIPTION
Slot (N) Edit VLAN
Static Entry This is the card’s slot number.
Up Click this link to go to the Static VLAN Setup screen.
VLAN ID This is the number that identifies the VLAN group. When you add a static VLAN, type a
number (1-4094) to identify the VLAN. When you edit a static VLAN, you cannot change
this number.
Active Select this check box to enable this VLAN when you click Apply below. Clear this check
box and click Apply below to disable this VLAN without having to delete it.
Port Number This field displays the port number.
Normal Select Normal registration for the associated port if you want that port to join this VLAN
group using GVRP.
Fixed Fixed registration ports are permanent members of this VLAN group.
Forbidden Select forbidden for a port to block that port from joining this VLAN group.
TX Tagging Select TX Tagging registration for the associated port if you want that port to tag all
outgoing frames transmitted. Only select this if the subscriber's DSL modem or router
supports 802.1Q VLAN.
Click Apply to save your changes back to the line card. Click Reset to begin configuring this screen afresh.
30.4 ALC Management VLAN Edit Screen
Click VLAN Setup in the navigation panel and then a card’s link in the VLAN Setup screen.
Click the management card’s VLAN ID in the ALC Static VLAN Setup screen to open this screen.