ZyXEL Communications ALC1024, User Manual

Page: 117 / 255

Commands with EEC
Firmware Upload and Recovery 13-5
Do not turn off the IES-2000/3000 during the updating process, as it may corrupt the firmware
and make your unit unusable.
1. Telnet to your line card’s IP address (192.168.1.1 is the default).
2. Run
BootpTftp.exe
, to bring up the following window. Click New to create a MAC address
entry.
Figure 13-1 BOOTP/TFTP Server
3. The Input Box window will pop up as shown next. Type the MAC address of the line card and then
click OK . You can find the MAC address of the line card on its boot console.
Figure 13-2 Input MAC
4. Type the host IP address (the IP address you want to assign to the line card), server IP address (the
IP address of this computer), net mask, gateway and filename (the new firmware name) into the
appropriate fields in the screen shown next. Click
Update Database .