![background image](http://html1.mh-extra.com/html/zyxel-communications/alc1024/alc1024_user-manual_944686156.webp)
Web Configurator with EEC 1
18-4
Port Setup
Table 18-1
Line Card Port Setup
LABEL
DESCRIPTION
Duplex
The duplex mode can be half (meaning traffic is transmitted in one direction at a time) or full
(meaning traffic is simultaneously transmitted in both directions).
PVID
This is the VLAN ID that the line card assigns to untagged packets that come in through this
port.
ADSL
Port
This field identifies the port's index number.
Enable
This field shows whether the port is turned on (Yes) or not (No). The factory default of all ADSL
ports is disabled. A port must be enabled for data transmission to occur.
Profile
This field shows which profile is assigned to this port.
Mode
This field shows which ADSL operational mode the line card is set to.
Speed (K)
This field displays this port's encapsulation type.
Encap
This field displays this port's encapsulation type.
VPI
This field displays this port's Virtual Path ID.
VCI
This field displays this port's Virtual Circuit ID.
PVID
This is the VLAN ID that the line card assigns to untagged packets that come in through this
port.
18.6.1
Ethernet Port Setup Screen
Click
Ethernet
in the
Port Setup
screen to open this screen.
Figure 18-2 Ethernet Port Setup
The following table describes this screen.
Summary of Contents for ALC1024
