ZyXEL Communications ALC1024, User Manual

Page: 199 / 255

Commands with MSC
Commands with MSC 27-3
Table 27-1 Commands with MSC
COMMANDS DESCRIPTION
profile list [<"*dsl">
[<profile_name>]]
Shows profile contents.
profile map <"*dsl">
<prof_name>
Displays a profile’s port mapping.
pvc set <slot-port-
vpi/vci> <...>
Creates or modifies a PVC setting.
pvc delete <slot-port-
vpi/vci>
Removes a PVC setting.
pvc list [<slot-port-
vpi/vci>]
Displays PVC settings.
pvid set <slot-port> <pvid> Sets a port’s default VID.
pvid list <slot> Displays port PVID settings.
priority set <slot-port>
<priority>
Sets a port’s default priority.
priority list <slot> Displays port default priority settings.
bonding set <slot-port>
<name> <'c'|'r'>
Sets G.SHDSL port bonding. This only
applies to the SLC card.
bonding delete <slot> <name> Removes G.SHDSL port bonding. This only
applies to the SLC card.
bonding list <slot> Displays G.SHDSL port bonding settings.
This only applies to the SLC card.
isolate [enable/disable] Enables/disables port isolation.
config convert Backward compatibility command.
maccount active <slot> Turns on a line card’s MAC address count
filter.
inactive <slot>
Turns off a line card’s MAC address count
filter.
set <slot> <count> Sets a line card’s MAC address count filter.
list Displays the system’s current MAC address
count settings.
Command <slot> <subcommands> Sends commands to the line card in the
specified slot.
lineinfo <port> This command shows the statistics of the
specified DSL ports.
lineperf <port> This command shows the line quality of the
specified DSL port.
loopback <port> <mode> Performs loopback test. <mode> = "local" or
"f5"
list port <port> Displays line settings.
list ports Displays line settings on all ports.