ZyXEL Communications ALC1024, User Manual

Page: 68 / 255

Commands with EEC
5-10 ADSL Commands
Figure 5-7Show Profile Command Example
This display shows that the maximum transmission rate coming into the line card is set to 800 kbps and the
maximum transmission rate going out from the line card is set to 8000 kbps. The
ConfProfileRowStatus
displays
active
; this means that the profile is available for use. It does not mean that the profile has been
applied to any of the ports. See the section on the
set profile
command for more information on a profile’s
settings. Refer to the
set port
command for information on assigning profiles to ports or the
list
profiles
command for information on how to list the profiles.
5.7.16 Show Profiles Command
Syntax:
192.168.1.1 adsl> show profiles
The
show profiles
command displays the settings of all the ADSL profiles.
The following
show profiles
command example shows the settings of the default profile DEFVAL and
another profile named debug. See the section on the
set profile
command for more information on a profile’s
settings.
192.168.1.1 adsl> show profile debug
#Entry type : adslLineConfProfileEntry
ConfProfileName : debug
AtucConfTargetSnrMgn : 6 db
AtucConfMaxSnrMgn : 31 db
AtucConfMinSnrMgn : 0 db
AtucChanConfInterleaveMinTxRate : 32 Kbps
AtucChanConfInterleaveMaxTxRate : 8000 Kbps
AturConfTargetSnrMgn : 6 db
AturConfMaxSnrMgn : 31 db
AturConfMinSnrMgn : 0 db
AturChanConfInterleaveMinTxRate : 32 Kbps
AturChanConfInterleaveMaxTxRate : 800 Kbps
ConfProfileRowStatus : active(1)