ZyXEL Communications ALC1024, User Manual

Page: 181 / 255

Web Configurator with EEC 2
Maintenance 22-3
Figure 22-2 Secured Client Setup
The following table describes this screen.
Table 22-2 Secured Client Setup
LABEL DESCRIPTION
Maintenance Click Maintenance to return to the main maintenance screen.
Secured
Enable Select this check box to allow these secured clients to manage the line card. Do not select
this check box unless the IP address that you are using to manage the line card is already
configured as one of the client addresses below. The line card blocks your access if you
apply this page with this check box selected and your IP address is not one of the configured
client addresses.
Index This is the client index number. Click a client's index number to go to a page where you can
edit it.
Client Address The address of a client that is permitted to use a service (Telnet, FTP, Web) to manage the
line card. For example, 192.168.1.100.
Apply Click Apply to save your changes back to the line card 's volatile memory. The line card
loses these changes if it is turned off or loses power, so use the Config Save link in the
navigation panel on the left to save your changes to the non-volatile memory when you are
done configuring.
Cancel Click Cancel to begin configuring this page afresh.
Edit Secured Client Screen
Click Maintenance in the navigation panel and then Secured Client in the Maintenance screen.
Click an index number in the Secured Client Setup screen to open the Edit Secured Client screen.
Use the Edit Secured Client screen to configure the IP addresses that an administrator can use to manage the line
card.