ZyXEL Communications ALC1024, User Manual

Page: 47 / 255

Commands with EEC
Commands with EEC Introduction 3-13
Table 3-1 Commands with EEC
COMMANDS DESCRIPTION
MODULE COMMAND ATTRIBUTES
isfs
trace This command shows the ISFS trace
level.
<level> This command sets the ISFS trace level.
version This command shows version information
for the ISFS module.
oam
version This command shows version information
for the OAM module.
cofnig This command shows the configuration
for the the OAM module.
trace This command shows the trace level for
the OAM module.
<level> This command sets the trace level of the
OAM module.
dl This command dumps the contents of the
lookup tables.
passwd This command changes the management
password.
restart This command saves the configuration
and restarts the system.
snmp
access [read | wirte] <community> <ip> This command adds an SNMP access
entry.
delete <community> <ip> This command deletes an SNMP access
entry.
flush This command deletes all SNMP access
entries.
list This command lists all SNMP access
entries.
trap add <community> <ip> This command adds a trap destination.
delete <community> <ip> This command deletes a trap destination.
flush This command deletes all trap
destinations.
list This command lists all trap destinations.
config save This command saves access entries and
trap destinations to the nonvolatile
memory.
sys