ZyXEL Communications ALC1024, User Manual

Page: 48 / 255

Commands with EEC
3-14 Commands with EEC Introduction
Table 3-1 Commands with EEC
COMMANDS DESCRIPTION
MODULE COMMAND ATTRIBUTES
info This command shows the system
information.
set name <name> This command sets the system name.
contact <name> This command sets the contact person’s
name.
chassis <id> This command sets the chassis ID
number.
location <loc> This command sets the location.
fast | normal This command sets the bridge operation
mode.
errlog clear This command clears the system error
log.
display This command shows the system error
log.
syslog This command shows the syslog setting.
enable | disalbe This command enables or disables the
syslog.
facility <facility> This command sets the syslog facility.
server <ip> This command sets the syslog server IP.
secured host This command shows the secured host.
host enable | disable This command enables or disables
checking for the secured host.
host add <hostIp> This command adds a secured host.
host delete <hostIp> This command deletes a secured host.
get slot This command shows the slot ID.
uptime This command shows the system uptime.
version This command shows the system version
information.
vlan1q
config save This command saves the VLAN settings
to nonvolatile memory.
print This command shows the run-time VLAN
settings.
reset This command reloads the VLAN settings
from nonvolatile memory.
dvlan getentry <vid> This command shows the dynamic VLAN
status for the specified entry.
list This command shows all dynamic VLAN
status.