SAFETY INFORMATION
Lattice Lightsheet 7
User Interface - Mounting and Dismounting Components
ZEISS
04/2021 V_01
000000-2324-960
53
The detection module cables are connected as follows:
•
CameraLink cables A and B are each plugged into the PC for system control.
The upper slots of the PC for system control are assigned to the detection module of the camera port
(Cam1), [CamLink A] right and [CamLink B] left.
The lower slots are assigned to the unused port (Cam2), [CamLink A] right and [CamLink B] left.
•
The power cable is connected to the 6-point power strip of the system.
•
The trigger cable is always connected to the detection module with [1/IN] and on the rear side of the
main system module Lattice Lightsheet 7 to the Camera 1/IN socket (Fig. 32/
1
).
•
The detection module is switched on with the toggle switch (Fig. 32/
10
) on the module itself.
