SAFETY INFORMATION
Lattice Lightsheet 7
User Interface - Mounting and Dismounting Components
ZEISS
04/2021 V_01
000000-2324-960
51
1.13.8
Detection Module (pco.edge)
Lattice Lightsheet 7 has one Camera port on the rear side.
A pco.edge 4.2 CLHS sCMOS camera is attached to this camera port (Fig. 32).
A cooling liquid defined as a hazardous substance is used in the Lattice Lightsheet 7 to cool the
detection modules (depending on configuration). The supplied safety data sheet with notes on
hazards and safety measures must be observed when handling the cooling liquid.
The port for the camera is no user interface and for service only. Never remove the camera or the
blind cap
that might cover the port if the camera was detached
.
1
Detector port 1
6
Power socket
2
Rotation guard plate with laser protection label
7
Trigger out BNC connecter
3
Tubing input connector
8
Trigger in BNC connectors
4
Tubing output connector
9
On/off toggle switch
5
Camera link socket
10
Contact ring of the detection module
Fig. 32
Mounting of the sCMOS camera to the Lattice Lightsheet 7 camera port
