Zaxcom Fusion User’s Manual______________________________________________________Chapter 2
85
Decay button Shortcuts
Clicking the button the first time selects it. This allows the value to be modified by the
Inc
and
Dec
buttons
.
Clicking it a second time opens it for direct access.
See:
Common Data Entry Field Shortcuts List
{
p.146
}
Thresh button
(Compressor Threshold) Sets the threshold above which gain reduction occurs according to the Compressor
Ratio setting. (Valid range:
-60.0
–
-20.0
–
0.0 dB
, Value step: 0.1)
Thresh button Shortcuts
Clicking the button the first time selects it. This allows the value to be modified by the
Inc
and
Dec
buttons
.
Clicking it a second time opens it for direct access.
See:
Common Data Entry Field Shortcuts List
{
p.146
}, with the following exception(s):
BACKSPACE
key
– 1) The first time the backspace is pressed it enters a decimal point.
2) If the cursor is on the last character, it deletes the character at the cursor and moves
the cursor left one character.
3) If the cursor is not on the first or last character, it moves the cursor left one position,
without deleting the character.
4) If the cursor is on the first character, it has no effect.
Ratio button
(Compressor Ratio) Sets the compressor ratio, i.e. 4.0:1 means for every 1 dB above the Compressor Threshold
the gain will be reduced 4 dB. (Valid range:
1.0:1
–
20.0:1
, Value step: 0.1)
Ratio button Shortcuts
Clicking the button the first time selects it. This allows the value to be modified by the
Inc
and
Dec
buttons
.
Clicking it a second time opens it for direct access.
See:
Common Data Entry Field Shortcuts List
{
p.146
}
Gain button
(Make up Gain Setting) Used to compensate for the gain reduction caused by the action of the compressor.
(Valid range:
0.0
–
20.0 dB
, Value step: 0.1)
Gain button Shortcuts
Clicking the button the first time selects it. This allows the value to be modified by the
Inc
and
Dec
buttons
.
Clicking it a second time opens it for direct access.
See:
Common Data Entry Field Shortcuts List
{
p.146
}, with the following exception(s):
BACKSPACE
key
– 1) The first time the backspace is pressed it enters a decimal point.
2) If the cursor is on the last character, it deletes the character at the cursor and moves
the cursor left one character.
3) If the cursor is not on the first or last character, it moves the cursor left one position,
without deleting the character.
4) If the cursor is on the first character, it has no effect.
Copy Compress button
This is used to save you time and copy all compressor settings to the current channel from another specified
channel. To copy the settings from one compressor to another, perform the following:
Go to the channel you want to copy the settings to.
Press the
Copy Compress
button
.
(A data entry field is displayed.)
Using the keypad, enter the channel that you want to copy the compression settings from and press the
ENTER
key
. (The settings are copied and the page is updated.)
Repeat 1 thru 3 for each additional channel you want to copy settings to.
Inc button
Increments the selected parameter by its step value.
Dec button
Decrements the selected parameter by its step value.
